Sunkist juicer replacement parts from wedger to plunger to extracting bulb. We have replacement parts for all repair needs for all models.
71 Part(s)
per page
-
Umbrella Seal
Part No. PD211718
$15.75- Only for use on grooved eccentric housings, replaces PD137408, PD137413 & PD137409.
-
Umbrella Ring with Set Screw &
Part No. PD211719
$24.75- Umbrella Screw with set screw and gasket.
- NOT for use on grooved eccentric housings.
-
-
-
Top Motor Casting
Part No. PD211733
$95.20- Used on various Sunkist models such as #8, and where part is applicable.
-
Toggle Switch With Switch Guard
Part No. PD211767
$41.40- Item PD137457 is a metal toggle switch with switch guard.
- It is used on our older juicers.
-
-
-
-
-
Strainer with Lever Lock & Screws #7
Part No. PD211764
$111.14- Strainer
- with lever lock
- For the #7 Juicer
- ID of Center Hole is 1"
- OD of Strainer is 6-5/8"
-
-
-
-
-
-
SHAFT TIP W/PIN, GRADUATED TIP
Part No. PD40766
$41.40- Shaft Tip with Pin
- Graduated tip
- (only use with bulbs with metal inserts)
- For Sunkist Juicer models with Serial #s after 8-47078
-
SHAFT TIP W/PIN, FLAT TIP
Part No. PD40767
$41.40- Shaft Tip with Pin
- Flat tip, graduated design (only use with bulbs without metal inserts)
-
SHAFT TIP W/PIN, bulbs w/metal inserts
Part No. PD40765
$41.40- Shaft Tip with Pin
- (only use with bulbs with metal inserts)
- For models with Serial #s before 8-47078
-
-
SCREWS, SPACERS, WASHERS (SET OF 3)
Part No. PD10006
$22.50- For Sunkist model 8 juicer
- Special order
-
RUBBER FEET (SET OF 3)
Part No. PD33752.7
$15.75- Feet, set of three
- For Sunkist commercial juicer model 8
-
-
-
Rocker Switch with Switch Seal
Part No. PD211766
$28.00- Plastic Rocker Switch
- Comes with switch seal
- Use for Sunkist Juicer model.
-
Plastic Spout Only
Part No. PD31597.43
$32.00- Plastic Spout only
- (Included with PD35465.7)
- Used on various Sunkist models such as Sunkist Juicer, and where part is applicable.
-
Plastic Dome Only
Part No. PD31596
$65.12- Plastic Dome only
- Use for Sunkist models J-1, J-2 and J4 only
- (Included with PD35465.7)
-
-
-
ORANGE FITS 7 & 8, EXTRACTING BULB
Part No. PD30967.1
$32.00- BULB, EXTRACTING (ORANGE)
- Has metal insert in bulb for 3/8 shaft head
- Round shaft
- For models prior to July 2005
-
ORANGE EXTRACTING BULB, FITS 7 & 8
Part No. PD40741
$47.89- Without metal insert in bulb for units with 1/2 shaft head
- Square inside the bulb
- Fits models 7 & 8
- For units made after August 2005
-
-
-
-
-
-
-
-
-
-
Lock Washer, 1/4, Internal Tooth
Part No. PD211727
$6.00- Used on various Sunkist models such as #8, and where part is applicable.
-
Lever Lock & Screws for Strainer
Part No. PD211759
$18.00- Lever Lock for Strainer
- Used on Sunkist models 8, S-102
-
LEMON LIME EXTRACTING BULB, w/o INSERT
Part No. PD40740
$32.00- Lemon Lime Extracting Bulb
- Without metal insert in bulb
- for units with 1/2 shaft head
- Fits model 8 only
- For units made after August 2005.
-
LEMON EXTRACTING BULB, W/METAL INSERT
Part No. PD30968.1
$32.00- Lemon Lime Extracting Bulb
- Use for #8 model
- Has metal insert in bulb
- Use for 3/8 shaft head units
- For models prior to July 2005
-
Ground Screw with Lock Washer (set of 2)
Part No. PD211744
$6.00Ground Screw with Lock Washer (set of 2)
-
GRAPEFRUIT EXTRACTING BULB, NO INSERT
Part No. PD40742
$32.00- Extracting Bulb - Grapefruit
- Without metal insert inside bulb
- For units with 1/2" shaft head
- Use only with shaft tip #PD40767.
- For use with grapefruit.
- Fits both 8, 8-R, J-1 models.
- For models manufactured after 8/2005
-
GRAPEFRUIT EXTRACTING BULB
Part No. PD33730.43
$32.00- Grapefruit Extracting Bulb
- Has metal insert in bulb for 3/8 shaft head
- For models prior to July 2005
- For Model 7 & 8 juicer, Sunkist
-
-
-
-
-
Eccentric Housing with Bearings
Part No. PD211741
$124.25- Comes with Bearings, Gasket & Brass Tube.
- Designed for the #PD137413 juicer.
-
-
Eccentric Arm
Part No. PD211728
$27.00- Used on various Sunkist models such as J-1, J-2, J-4, J-5, J-8 and where part is applicable.
-
-
-
Connectors
Part No. PD211757
$10.00- Set of 4 connectors.
- These connectors are for use only with the Rocker Switch with Switch Seal.
-
Complete Bulb Set, all 3 (metal insert)
Part No. PD51070
$74.00- BULB, EXTRACTING SET
- Includes Orange, Lemon, Grapefruit bulbs
- Has metal insert in bulb for 3/8" shaft head
- We suggest you replace the shaft tip to make sure bulbs have secure fit
- For models with Serial #s before 8-47078 use PD40765
- For models with Serial #s after 8-47078 use PD40766
- For models prior to July 2005
NOTE: For models after August 2005 use PD51072.
-
Coil Spring
Part No. PD211768
$7.50- Used on various Sunkist models such as J-1, J-2, J-4, J-5 and where part is applicable.
-
-
-
Bronze Bushing, Eccentric Arm
Part No. PD211726
$10.00- 1/2 x 3/16 x 5/16
- Used on various Sunkist models such as #8, J-1, J-2, J-4, J-5 and where part is applicable.
-
Bronze Bushing Coil Spring to Motor Mt
Part No. PD211752
$6.00- Bronze Bushing Coil Spring to Motor Mount
- 9/64 x 3/8 x 1/4
- Used on various Sunkist models such as J-1, J-2, J-4, J-5 and where part is applicable.
-
Bronze Bushing Coil Spring
Part No. PD211742
$6.00- Bronze Bushing Coil Spring to Ecc. Housing
- 9/64 x 3/8 x 3/16
- Used on various Sunkist models such as J-1, J-2, J-4, J-5 and where part is applicable.
-
-
BOWL SUPPORT GASKET
Part No. PD36784.1
$15.75- Bowl support gasket
- Used on various Sunkist juicer models such as 8-RA97 and where part is applicable
-
Bowl Assembly; Dome, Spout and Base
Part No. PD53033
$131.15- This kit consist of a Dome, Bowl support and Spout
- Used on Various Sunkist Commercial Juicers such as #8, J-1, 8-R and where part is applicable
-
-
Arm Screw - Large 1.4-20 x 29.32
Part No. PD44153
$15.00- Used on various Sunkist models such as #8, and where part is applicable.
-
-
71 Part(s)
per page
© Copyright 2021 SupplyDIRECT, Inc. All Rights Reserved. Atlanta, Georgia